Phola by Rintal

The Phola is a high specification spiral stair system produced by the Italian manufacturer Rintal. Please read the specification below to get a better understanding of the product. If you are unsure of any of the terms please refer to our stair terminology page.

Please note that Stairplace will include the cost of a site survey as standard in our quotations to you (anywhere in England and Wales) and can offer a fitting service throughout the southeast of England.

Specification

• Treads - Solid Beech 40mm thick
• Centre column - Choice of either steel tube tread or solid Beech tread spacers with plastic discs
• Handrail - Solid Beech with a circular profile 50mm in diameter
• Handrail end caps and joining connectors - Stainless steel
• Balusters - Steel tube 25mm in diameter
• Baluster to handrail connectors - Plastic
• Cables (optional) - Stainless Steel
• Baluster to cable connectors - Metal
• Horizontal balustrade tubes (optional) - Stainless Steel
• Riser bars (optional) - Steel tube
• Finishing caps - Plastic
• Lower floor plate cover - Plastic

Wooden components

Material - Solid Beech, block laminated

Size of individual blocks - 40x40mm

Graded for evenness of colour - Yes

Finger jointed - No

Finish - Two coats of varnish. The first coat always contains a coloured stain which can be either a standard colour (see colour samples page), or can be a match for a sample provided by you. The second coat is always a clear varnish.

Metal components

The optional pressed steel tread spacers and the balusters are powder coated to any RAL colour, although there are three colours that are considered standard (see colour samples page). Alternatively the balusters (not the tread spacers) may be chrome plated. Other metals (screws, nuts, bolts ect) are a multitude of finishes.

Plastic components

A number of plastics are used to produce the various components. They are generally coloured to match the powder coating of the steel parts. Some are translucent.